HPX 6000

Overview

Light-weight and easily manageable, the HPX series amplifiers offer practicality as one of their primary features. Their switching mode power supplies and efficient cooling systems make them particularly suited for use in compact and portable systems and, at the same time, make them reliable and durable even after years of intense use. Thanks to the combination of an efficient 3-tier CLASS H power stage and a reliable switching power supply, the HPX6000 can deliver 6000 watts total at 2 ohm load making it a very convenient source of power in even the most demanding sound reinforcement applications. With an overall efficiency higher than 75% and a comprehensive set of controls, including a 3-position GAIN selector and switchable SOFT CLIP LIMITERS, the HPX6000 represents a cost-effective solution also for large sound reinforcement systems requiring very high power levels combined to top quality performance. The front panel, which offers convenient, die-cast handles and a removable dust filter, provides a comprehensive system of LED status indicators and indexed level controls.

Tech description

Power 8 ohm *

1200W

Power 4 ohm *

2000W

Power 2 ohm **

3000W

Power BRIDGE 8 ohm *

4100W

Power BRIDGE 4 ohm **

6000W

Output Stage

3-tiers CLASS H

Frequency response (+0/-0.5 dB)

20 Hz – 20 KHz

Input Sensitivity (nominal)

0 dBu / 0.775Vrms: 42 dB

  • 1.0 Vrms (0 dBV): 40 dB

  • +10 dBu/2.45Vrms: 32 dB

Input Sensitivity (fixed gain)

GAIN (nominal/fixed)

Input Connectors / Impedance

XLR M (with XLR F LINK), 20 Kohm (balanced), 10 Kohm (unbalanced)

Output Connectors

SPEAKON and Binding Post

Damping Factor

> 200

Slew Rate

> 20 V/uS

S/N Ratio (unweighted)

> 90 dB

THD+N

< 0.1%

Controls

INPUT LEVEL, INPUT SENSITIVITY, STEREO/BRIDGE/PARALLEL, LOW PASS NOTCH (LPN), GND LIFT

LED Indicators

POWER,   ON,   PARALLEL,   BRIDGE,   SIGNAL,   LIMIT,   PROTECT

Cooling

Variable speed DC fan

Protections

AC low power, DC, thermal, short circuit, VHF, CLIP limiter, SOFT CLIP limiter

Mains Supply Voltage

230 VAC (±10%) 50/60 Hz or 120VAC (±10%) 50/60 Hz

Maximum Consumption

3320 VA

Rated Consumption ***

830 VA

Standby Consumption

6 VA

Dimensions (W x H x D)

483 x 89 x 505 mm

  • 19″ x 3.5″ x 19.9″

Weight

13.6 Kg (29.9 lb)

* RMS both channel THD < 1%

 

** 40 ms burst

 

*** Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.